These guides are written for procurement engineers, EPC contractors and facility owners who need to make a tank decision before they issue a purchase order. They are not product brochures. Each guide takes one decision that repeatedly causes trouble — bolted versus welded construction, supplier verification, or potable-water material selection — and sets out the inputs, the trade-offs and the documents to ask for.
Guide library
| Guide | What it answers | Best used when |
|---|---|---|
| Bolted vs welded water tanks: how to choose for your project | Site access, delivery, expansion, maintenance and lifetime cost of bolted sectional versus welded construction. | You have a capacity and a site, but have not fixed the construction method. |
| How to verify a genuine water tank manufacturer before you wire money | Business licence, bank account, factory address, references and the checks that separate a manufacturer from a trading intermediary. | You have received a quotation and want to verify the supplier before paying a deposit. |
| Choosing panel material for potable water storage: 304, 316, HDG, BDF or GFS | Water chemistry, budget, design life and approval requirements for the main wetted-surface options. | You need a potable tank and are comparing stainless, galvanized, duplex-coated and glass-coated panels. |
What each guide covers
Bolted versus welded
The guide compares the two construction methods on the things that change the installed cost: panel size and transport, site lifting, hot-work permits, joint maintenance, expansion, repair and the ability to build inside an occupied building. It does not declare one method universally better. A welded tank can be the right choice for a hygienic or seamless vessel; a bolted tank can be the right choice for a remote site, a basement or a project that cannot shut down. The guide shows how to decide for the actual site.
Supplier verification
The guide sets out a verification sequence: legal entity and business licence, bank account name matching the contracting entity, factory address and production capability, product-specific references, certificate scope and the commercial documents. It explains why a low price from an intermediary can become expensive when a panel is missing, a certificate is not valid or a warranty claim has no manufacturer behind it. Use the checklist before a deposit, not after a problem.
Potable-water material selection
The guide compares SS304, SS316/316L, HDG, BDF and GFS on water chemistry, cleanability, approval, design life and budget. It explains why “food grade” is not a specification, why chloride and temperature matter for stainless, why a zinc surface may need a liner or a different material, and why a coating approval must name the product and factory. The guide is a shortlisting tool; the final choice still needs the water analysis and the local authority requirement.
How to use the guides
Read the guide that matches the decision you are about to make, then send the project inputs to LONGCOM for a written confirmation. The guides are intentionally concise on commercial claims and detailed on the checks a buyer can actually perform. If a guide raises a question that is specific to your site, put it in the enquiry rather than relying on a generic answer.
