Fire Protection Water Tanks

A fire protection water tank is sized around the fire-flow demand and the duration the authority requires, not around a generic “large tank” assumption. LONGCOM supplies bolted stainless, welded stainless, hot-dip galvanized (HDG), glass-fused-to-steel (GFS) and BDF panel tanks for fire reserves in warehouses, factories, logistics parks, data centres, hospitals, commercial buildings and municipal facilities.

The tank must hold the dedicated fire reserve, refill within the allowed period, deliver the required outlet flow without vortexing, and remain accessible for inspection and testing. The final design is confirmed against the project’s fire strategy, the applicable code and the authority having jurisdiction (AHJ).

Which tank system fits a fire reserve?

System Typical fire-reserve role Strengths Confirm before quoting
Bolted stainless (SS304 / SS316) Dedicated fire reserve where a clean, uncoated internal surface is preferred. Factory-punched panels, fast site assembly without hot work, container-friendly packing, replaceable panels. Fire-flow and duration, usable volume, make-up rate, base and anchorage, outlet arrangement.
Welded stainless (304 / 316 / 316L) Seamless shell, high-head or constrained footprint; projects that require welded construction. No bolted joint pattern, suitable for irregular shapes and higher heads; workshop-controlled welding. Plate thickness, stiffener layout, weld inspection, site welding capability, lifting plan.
HDG bolted Large-volume fire reserve where coated steel is accepted. Lower installed cost per cubic metre; flat-packed panels; established for industrial fire water. Coating acceptance, water quality, local code, service life, touch-up procedure.
GFS bolted Large municipal or industrial fire reserve; aggressive soil or atmospheric exposure. Factory-fired glass coating; corrosion resistance; modular panels; long service life. Coating thickness and repair procedure, foundation, panel lead time, local acceptance.
BDF bolted Fire reserve where a coated panel is acceptable and budget sits between HDG and GFS. Duplex-coated galvanized panel; bolted assembly; good balance of cost and corrosion protection. Coating system, water chemistry, warranty terms, local approval.

Design inputs that decide the tank

Fire tank enquiries often arrive with a capacity number but no design basis. The following inputs should be fixed before a supplier can offer a compliant tank:

Input Why it matters Typical question to answer
Fire-flow demand Sets the outlet size and the hydraulic capacity of the tank and pipework. What flow rate (L/s or gpm) must be available at the fire pump suction?
Duration Converts flow into a required stored volume. How many minutes or hours must the flow be sustained?
Usable volume Nominal geometric volume is not the same as usable fire reserve. What freeboard, dead volume and vortex allowance must be deducted?
Make-up / refill rate Determines whether the tank can recover after a fire event. What refill rate is available, and how quickly must the reserve be restored?
Footprint and height Drives panel count, base load, wind/seismic design and container plan. What land or roof area is available, and what height limit applies?
Structural loads Wind, snow, seismic and base bearing affect panel thickness and anchorage. What design loads and seismic use group apply?
Outlet and suction Poor outlet detail causes vortexing and loses usable capacity. What anti-vortex arrangement, outlet size and clearance are required?
Access and inspection Fire tanks must be inspectable and testable over their service life. What ladder, roof access, vent and drain provisions does the AHJ expect?

Material and configuration notes

For a dedicated fire reserve, the tank is usually uncoated stainless or a coated steel system. Stainless is selected when the project wants an uncoated contact surface, easy cleaning and a replaceable panel system. SS304 is the default for neutral water; SS316 is used where chloride, brackish water, coastal exposure or a project specification calls for it. Coated systems are selected when the fire code permits them and the owner accepts the coating maintenance regime.

Do not size the tank from the pump rating alone. The tank must provide the required volume at the required suction condition, and the fire pump must be able to draw without cavitation. The outlet should be arranged with an anti-vortex plate or a suction box, and the tank should have a drain, overflow, vent and access opening that the inspector can use.

For a roof-mounted or elevated fire tank, the base and anchorage become the critical items. The structural engineer must confirm the roof load, seismic restraint, wind uplift and access for panel delivery. A tank that is structurally adequate on a ground slab may not be acceptable on a roof without a transfer structure.

Standards and approvals

Fire tank projects commonly reference NFPA 22, EN 12845 or a local fire code. The design basis, tank capacity, outlet arrangement, make-up connection and inspection requirements should be stated in the enquiry. LONGCOM can design and document the tank to the stated basis and provide material certificates, dimensional records and water-fill test records. The AHJ approval, fire pump acceptance and site commissioning remain project responsibilities unless separately contracted.

Where a project requires a listed or certified product, the tender should state the exact listing or certificate. We do not claim a listing, approval or certificate that is not backed by a document issued for the project. If a required certificate is not held, we will say so before award rather than after delivery.

Project reference: Prologis Dongguan Shipai Logistics Park

A fire water tank for the Prologis Dongguan Shipai Logistics Park was completed in June 2015. The installation used a 12 m × 12 m × 6 m tank, a nominal geometric volume of 864 m³, delivered as a factory-built panel system for site assembly. The project is a reference for large-footprint fire reserves where panel logistics, base preparation and a fixed completion date matter as much as the tank itself.

Read the full Prologis project reference for the application, delivery and installation notes.

Export and installation planning

Fire tanks are usually volume-limited cargo. Panels, tie rods, seals, bolts, roof structure and fittings are packed in numbered crates against the erection sequence. A 40HQ is the default for a medium panel kit; a small tank or spare-parts order may fit a 20GP. Oversize welded sections may need flat-rack or break-bulk.

Plan the site sequence before the container arrives: base acceptance, panel delivery area, crane or forklift, storage, assembly, torque, water-fill test and inspection. The export logistics hub covers container loading, packing, documentation and Incoterms; the installation guide covers the site hold points.

Fire tank FAQ

Is nominal tank volume the same as usable fire volume?

No. Usable volume is normally lower than the nominal geometric volume because freeboard, dead volume, vortex allowance and outlet clearance must be deducted. The fire design should state the usable volume and the basis for the deduction.

Can a bolted tank be used for fire water?

Yes, where the applicable code and AHJ accept a bolted steel tank. Bolted stainless or coated bolted systems are common for industrial and logistics fire reserves. The project must confirm the required listing, coating or material and the inspection access.

Should the fire tank be stainless or galvanized?

Stainless is selected when an uncoated contact surface, cleanability or a project specification calls for it. Galvanized or GFS is selected when the code accepts a coated system and the owner accepts the coating maintenance regime. The decision should be made on water chemistry, service life and local approval, not only price.

What is the minimum outlet arrangement?

The outlet should avoid vortexing and should be accessible for inspection. A suction box, anti-vortex plate, adequate clearance from the floor and a correctly sized outlet are typical requirements. The fire pump manufacturer’s suction conditions also apply.

Do you provide fire pump and pipework?

The tank scope can include panels, roof, access, connections, seals, fasteners and documentation. Fire pumps, valves, pipework and controls are normally supplied by the mechanical contractor unless a wider package is agreed in writing.

What documents are issued for a fire tank?

Typical documents include the general arrangement drawing, panel schedule, material certificates, dimensional inspection record, water-fill test record, installation manual, O&M instructions and warranty document. Third-party witness or AHJ inspection can be included if agreed before production.

Send your fire tank data for a written specification

Need a product specification for your project?

Send your capacity, flow, water quality, material and site requirements — quotation response within 12 working hours.

Request a Quotation