Guangzhou Changlong Stainless Water Tank

A hospitality and entertainment complex cannot afford a domestic water tank that is difficult to clean, difficult to access or difficult to repair while the site stays open. The Guangzhou Changlong Group project is a reference for a stainless steel domestic water tank in a large hospitality and leisure complex, where continuity of operation and maintenance access are part of the tank brief.

Project profile

Item Public project record
Project Guangzhou Changlong Group stainless steel water tank
Location Guangzhou, Guangdong, China
Application Domestic water storage for a hospitality and entertainment complex
Scope recorded Stainless steel domestic water tank
Capacity / date Not disclosed in the public record; confirm with the project team before reuse

This is a project reference profile, not a full case study. The capacity, final dimensions and completion date are not stated because they are not confirmed in the public record. The page explains the application logic for a similar hospitality project and the questions that should be closed before a tank is specified.

The challenge

A large hospitality and entertainment complex has an irregular demand profile. Domestic water demand can vary sharply across the day, and the tank may serve kitchens, guest facilities, cleaning, landscape and back-of-house areas. The tank has to provide storage without becoming a stagnation risk, and it has to be accessible for cleaning and inspection without shutting down the site.

These sites also have a high cost of interruption. A leak or a water-quality complaint is not only a maintenance issue; it can affect guests and operations. The tank location, access route and isolation arrangement should be planned so that maintenance can be carried out in a controlled way.

The solution

The project used a stainless steel domestic water tank. Stainless is selected for potable and domestic duty where a clean contact surface, cleanability and a replaceable panel system are wanted. The material grade should be confirmed against the local water analysis; SS304 is common for neutral water, while SS316 or SS316L is used where chloride or a project specification requires it.

The tank arrangement should provide access for inspection and cleaning, a protected vent, a screened overflow, a drain and connections that avoid dead legs. For a hospitality site, the tank should be sized for the real demand profile, not only for a peak that occurs once a year. Oversized storage can increase stagnation, while undersized storage can cause supply pressure problems at peak demand.

Why stainless for domestic water

Stainless is not automatically “food grade”; the grade, finish, joint detail and cleaning regime decide the result. For a bolted tank, the sealing strip and internal joint are part of the wetted surface. For a welded tank, the weld finish and drainage matter as much as the plate. The project should specify the water chemistry, the disinfectant and the cleaning method, then choose the material and finish from those inputs.

Where the tank is in a public or guest-facing building, the external appearance and access also matter. A tank that is hidden behind a plant-room wall but cannot be reached for inspection is a future problem. The design should include the access door, the lighting and the safe working arrangement, not only the tank itself.

What the project demonstrates

  • Hospitality demand is irregular; tank sizing should follow a demand profile, not a single peak figure.
  • Stainless is selected for cleanability and a clean contact surface, with the grade confirmed against water chemistry.
  • Inspection and cleaning access should be designed with the tank, not added after commissioning.
  • Vent, overflow, drain and connections must be protected and reachable.
  • Maintenance planning matters as much as the initial installation.

Lessons for a similar project

Send the daily and peak demand, the water analysis, the disinfectant, the plant-room location and the access route. Confirm whether the tank serves a single building or a wider complex, and whether a fire reserve is combined with the domestic storage. If the tank is in a basement, confirm the largest panel that can pass through the door and the lifting arrangement.

For an export project, add the local potable-water requirement to the enquiry: NSF/ANSI 61, WRAS or a national approval. A material certificate is not the same as a product certification. If the project requires a certificate, name the exact standard and the country so the document scope can be confirmed before award.

Related pages

Read potable water storage for the hygiene and material inputs, and the bolted stainless tank or welded stainless tank for the product data. For site checks, use the installation guide.

Send your demand profile and water analysis

Need a product specification for your project?

Send your capacity, flow, water quality, material and site requirements — quotation response within 12 working hours.

Request a Quotation