A residential fire reserve is often constrained by the roof or podium structure before it is constrained by the fire flow. The Foshan Taihe Hongjun Mansion project is a reference for a residential development fire water tank where the tank had to be reviewed against the building structure, set to non-standard dimensions and pressure-tested before acceptance.
Project profile
| Item | Public project record |
|---|---|
| Project | Foshan Taihe Hongjun Mansion |
| Location | Foshan, Guangdong, China |
| Application | Residential fire water reserve |
| Scope recorded | Roof load review, non-standard tank dimensions, pressure test and acceptance |
| Capacity / date | Not disclosed in the public record; confirm with the project team before reuse |
This page is a project reference profile, not a full technical case study. The capacity, final dimensions and completion date are deliberately not stated because they are not confirmed in the public record. The application and scope are what make the project useful for a similar residential enquiry.
The challenge
Residential fire tanks are frequently placed on a roof, podium or basement plant room where the available footprint is fixed by the building design. The fire consultant sets the flow and duration; the structural engineer sets the load limit; the architect sets the access and the visual envelope. The tank has to satisfy all three, and the supplier is often asked to confirm a size before the structural review is complete.
A non-standard dimension is not simply a cut-down catalogue tank. The panel layout, stiffener spacing, roof arrangement and connection positions change with the geometry. If the tank is squeezed into a residual space without a base and access review, the installation can be difficult even if the tank is structurally adequate.
The solution
The project used a stainless steel fire water tank with a project-specific geometry. The scope recorded for the project includes a roof load review, non-standard dimensions and a pressure test before acceptance. The review connects the tank load to the supporting structure and confirms that the base can carry the filled weight without differential settlement.
The tank was arranged for the available plant space, with the connections and access positioned for maintenance rather than only for the initial installation. The pressure test is the final check: it proves the assembled tank and connections are leak-tight before the fire system is accepted.
Why stainless for a residential fire reserve
Stainless is selected where the project wants an uncoated contact surface, a cleanable tank and a replaceable panel system. For a residential development, the tank may sit in a plant room or on a roof where access for future maintenance is limited. A bolted stainless panel system can be assembled in sections and repaired locally, which is an advantage when the tank cannot be removed as a single unit.
The alternative coated system may be acceptable where the fire code permits it and the owner accepts the coating maintenance regime. The decision should be made against the water chemistry, the fire code, the structural load and the access route, not only the capital cost.
What the project demonstrates
- Fire tank geometry should be reviewed against the building structure, not only the fire volume.
- Non-standard dimensions require a project drawing and a panel layout, not a catalogue selection.
- Roof load and base level are design inputs, not site afterthoughts.
- Pressure testing is a hold point before fire-system acceptance.
- Access for future inspection should be designed with the tank, not added after installation.
Lessons for a similar project
Send the fire design basis and the available plant-room or roof dimensions together. If the structural review is not complete, state the load limit and let the tank supplier propose a geometry within it. Do not approve a tank drawing before the base, anchorage and access route are checked. A residential project often has a fixed handover date; a late base or access issue is more expensive than a slightly larger plant room.
Related pages
Read fire protection water tanks for the design inputs, and the bolted stainless tank for the panel system. For site checks, use the installation guide.
